Inch Mercury to Millimeter Mercury

inHg

1 inHg

mmHg

25.4 mmHg

Conversion History

ConversionReuseDelete

1 inHg (Inch Mercury) → 25.4 mmHg (Millimeter Mercury)

Just now · Rounding: Up to 8 significant figures
Recalculate this conversion using your current rounding settings.

Entries per page:

1–1 of 1


Quick Reference Table (Inch Mercury to Millimeter Mercury)

Inch Mercury (inHg)Millimeter Mercury (mmHg)
125.4
5127
10254
20508
29.92759.968
30762
35889

Results rounded to a maximum of 8 significant figures



About Inch Mercury (inHg)

The inch of mercury (inHg) is a conventional pressure unit based on a 1-inch column of mercury at 32 °F (0 °C) under standard gravity, using the same adopted mercury density as mmHg. This converter preserves the full conventional factor: 133.322387415 Pa/mmHg × 25.4 mm/in = 3,386.388640341 Pa/inHg. Thus 1 inHg equals exactly 25.4 mmHg under the shared convention. Neither factor is rounded to a conversion-table approximation; the exactness describes the adopted reference, not the physical accuracy of a mercury-column measurement. It is the standard unit for atmospheric pressure and altimeter settings in US aviation and meteorology. Weather forecasts in the US report barometric pressure in inHg; aircraft altimeters in the US are set to inHg, with standard sea-level pressure at approximately 29.921 inHg. HVAC refrigeration technicians also use inHg for vacuum measurements below atmospheric pressure.

Standard sea-level atmospheric pressure is approximately 29.921 inHg. A major hurricane may lower barometric pressure below 27 inHg.

About Millimeter Mercury (mmHg)

The millimeter of mercury (mmHg) is a conventional pressure unit based on a 1 mm column of mercury at an adopted density of 13,595.1 kg/m³, representing mercury at 0 °C, under standard gravity of 9.80665 m/s². This converter preserves the full product: 1 mmHg = 133.322387415 pascals exactly under that convention. The adopted density is a reference value, not a claim that real mercury always has precisely that density. It is the universal unit for clinical blood pressure measurement and intraocular pressure in ophthalmology. Normal blood pressure is approximately 120/80 mmHg (systolic/diastolic). The unit is also used in vacuum technology, barometry, and respiratory physiology for reporting partial pressures of oxygen and carbon dioxide in blood. It remains entrenched in clinical medicine globally despite SI adoption.

Normal human blood pressure is about 120/80 mmHg. Standard atmospheric pressure is approximately 760 mmHg.

Etymology: Derives from Evangelista Torricelli's 1643 mercury barometer experiment, in which he first measured atmospheric pressure as the height of mercury column it could support — approximately 760 mm. The unit is named after the instrument's working fluid rather than its inventor.


Inch Mercury – Frequently Asked Questions

The US National Weather Service inherited the convention from early American meteorology, which used mercury barometers calibrated in inches. A typical sea-level reading of 29.92 inHg is easy to remember and fits weather maps without decimal clutter. Most other countries switched to millibars or hectopascals, but the US stuck with inHg for the same reason it kept Fahrenheit — familiarity and institutional inertia.

US air traffic controllers broadcast the local barometric pressure in inches of mercury — for example, "altimeter two niner niner two" means 29.92 inHg. Pilots dial this into their altimeter so the instrument reads correct altitude above sea level. If the setting is wrong by just 0.1 inHg, the altimeter reads roughly 100 feet off — enough to matter during instrument approaches in fog.

At sea level, 29.92 inHg is standard. Readings above 30.20 inHg are high-pressure (clear skies, calm winds). Below 29.50 inHg is considered low pressure and often signals approaching storms. The lowest sea-level pressure ever recorded was Typhoon Tip in 1979 at 25.69 inHg (870 mbar). A household barometer swinging from 30.50 down to 29.30 is a reliable sign that weather is deteriorating.

Refrigeration techs evacuate AC system lines to remove moisture before charging with refrigerant. They measure the vacuum in inHg below atmospheric pressure — a reading of 29 inHg (out of 29.92 max) means near-total vacuum. Industry best practice requires pulling to at least 29.92 inHg (or equivalently, below 500 microns on a micron gauge) to ensure all moisture has boiled off at room temperature.

1 inHg ≈ 33.86 mbar ≈ 0.491 psi. So standard atmosphere (29.92 inHg) is about 1013 mbar or 14.7 psi. For quick mental math: multiply inHg by 34 to get millibars, or divide by 2 to get a rough psi estimate. These conversions come up constantly when comparing US weather data with international sources or converting aviation altimeter settings for foreign aircraft.

Millimeter Mercury – Frequently Asked Questions

Clinical medicine is deeply conservative about units because misreadings kill people. Doctors, nurses, and patients worldwide have memorized "120/80 is normal" in mmHg. Converting to kPa (16.0/10.7) would require retraining millions of clinicians and rewriting every guideline. The WHO considered the switch and decided the risk of transcription errors during transition outweighed the elegance of SI compliance. So mmHg stays — likely for decades more.

The top number (systolic) is the peak pressure when the heart contracts and pushes blood into the arteries — typically 90–120 mmHg. The bottom number (diastolic) is the lowest pressure between beats when the heart relaxes — typically 60–80 mmHg. A reading of 140/90 mmHg or above is classified as hypertension. The gap between the two (pulse pressure) also matters: a wide gap above 60 mmHg may signal stiff arteries.

In 1643, Evangelista Torricelli filled a glass tube with mercury, inverted it into a dish of mercury, and watched the column drop to about 760 mm. The empty space above was the first laboratory vacuum. The height of the mercury column became the measurement of atmospheric pressure — approximately 760 mmHg at sea level. Nearly 400 years later, we still use his column height as a pressure unit in medicine and vacuum science.

They closely agree, but their definitions are different. One torr is exactly 1/760 of a standard atmosphere: 101,325/760 Pa, or approximately 133.322368421 Pa. The conventional mmHg instead adopts a mercury density of 13,595.1 kg/m³ and standard gravity of 9.80665 m/s², giving exactly 133.322387415 Pa for a 1 mm column. This converter preserves that full conventional factor, so 1 mmHg converts to approximately 1.000000142466 torr. Values such as 133.3224 Pa/mmHg in conversion tables are rounded approximations, not a different reference frame. The exactness belongs to the adopted convention, not to the accuracy of a real mercury barometer. Medicine commonly uses mmHg and vacuum science uses torr; precise conversions keep the units distinct.

Intraocular pressure (glaucoma screening): normal is 10–21 mmHg, above 21 is suspicious. Partial pressure of oxygen in arterial blood (PaO₂): normal is 80–100 mmHg. Central venous pressure: 2–6 mmHg. Intracranial pressure: normal below 15 mmHg, dangerous above 20 mmHg. Carbon dioxide in blood (PaCO₂): 35–45 mmHg. The unit pervades clinical monitoring far beyond the blood pressure cuff.

© 2026 TopConverters.com. All rights reserved.