Cubic foot to Imperial tablespoon
ft³
imp tbsp
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Cubic foot to Imperial tablespoon)
| Cubic foot (ft³) | Imperial tablespoon (imp tbsp) |
|---|---|
| 0.5 | 797.29093877318657480616 |
| 1 | 1,594.58187754637314961233 |
| 5 | 7,972.90938773186574806164 |
| 10 | 15,945.81877546373149612329 |
| 18 | 28,702.47379583471669302191 |
| 27 | 43,053.71069375207503953287 |
| 100 | 159,458.18775463731496123286 |
About Cubic foot (ft³)
A cubic foot (ft³) is the volume of a cube with 1-foot sides, equal to approximately 28.317 liters or 7.48 US gallons. It is used in the United States for natural gas billing, refrigerator capacity, aquarium size, concrete orders, and shipping container dimensions. Refrigerators are rated in cubic feet of storage, natural gas consumption is billed in cubic feet, and HVAC airflow is measured in cubic feet per minute (CFM).
A full-size refrigerator is typically 18–28 ft³. Natural gas is billed in CCF (hundreds of cubic feet) in the US.
About Imperial tablespoon (imp tbsp)
The imperial tablespoon is a unit of volume equal to approximately 17.758 milliliters, defined as five-eighths of an imperial fluid ounce. It is used in older UK and Commonwealth cooking recipes. The imperial tablespoon is larger than the US tablespoon (14.787 mL) but smaller than the Australian tablespoon (20 mL). Modern British and Commonwealth recipes have replaced it with the 15 mL metric tablespoon, but it persists in pre-metrication cookbooks.
Older British recipe books specify tablespoons of approximately 17.8 mL — larger than a US tablespoon but smaller than an Australian one.
Cubic foot – Frequently Asked Questions
How many liters are in a cubic foot?
One cubic foot equals approximately 28.317 liters. Since 1 foot = 30.48 cm, 1 ft³ = 30.48³ cm³ = 28,316.8 cm³ = 28.317 liters.
Why is natural gas measured in cubic feet in the US?
The US gas industry adopted cubic feet before metrication became widespread. Natural gas is billed in CCF (hundred cubic feet) or therms (≈ 100 ft³ by energy content). Metric countries use cubic meters.
What does cubic feet mean for refrigerators?
Refrigerator capacity is rated in cubic feet of internal storage. A compact dorm fridge is 1–4 ft³; a standard family fridge is 18–22 ft³; a large French door model can exceed 28 ft³.
What is CFM (cubic feet per minute)?
CFM measures volumetric airflow rate. HVAC systems, range hoods, and fans are rated in CFM. A typical home range hood requires 100–600 CFM; a whole-home HVAC system might move 2,000 CFM.
How many US gallons are in a cubic foot?
One cubic foot equals approximately 7.48 US liquid gallons. This is commonly used in plumbing, aquarium sizing, and pool volume calculations.
Imperial tablespoon – Frequently Asked Questions
How many milliliters is an imperial tablespoon?
One imperial tablespoon equals approximately 17.758 mL — larger than the US tablespoon (14.79 mL) and smaller than the Australian tablespoon (20 mL). Modern UK metric tablespoons are standardized at 15 mL.
What is the most common baking disaster caused by tablespoon size confusion?
Leavening failure. Baking powder and baking soda are measured in tablespoons, and the difference between a US tablespoon (14.8 mL), an imperial tablespoon (17.8 mL), and an Australian tablespoon (20 mL) is 15–35%. Too much baking soda makes bread taste metallic and soapy; too little and it does not rise. A British grandmother's scone recipe used in an American kitchen with US tablespoons will under-leaven by 20%. Professional bakers avoid this entirely by weighing leavening agents in grams.
Is the imperial tablespoon still used in UK cooking?
No. Modern UK cooking uses 15 mL metric tablespoons. The imperial tablespoon (17.76 mL) appears only in pre-1970s British cookbooks.
How many imperial teaspoons are in an imperial tablespoon?
One imperial tablespoon equals 3 imperial teaspoons (each ≈ 5.92 mL), giving 3 × 5.92 = 17.76 mL. The same 3:1 ratio as in US and metric systems, though the absolute sizes differ.
What is the standard tablespoon size in Australia?
The Australian tablespoon is 20 mL — the largest of the major English-language cooking tablespoons. Australian recipes therefore use fewer tablespoon counts than US or UK recipes for the same volume.