Deciliter to Cubic foot
dl
ft³
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Deciliter to Cubic foot)
| Deciliter (dl) | Cubic foot (ft³) |
|---|---|
| 0.5 | 0.00176573333605324085 |
| 1 | 0.00353146667210648169 |
| 2 | 0.00706293334421296339 |
| 5 | 0.01765733336053240847 |
| 10 | 0.03531466672106481694 |
| 20 | 0.07062933344212963388 |
About Deciliter (dl)
A deciliter (dL) is one tenth of a liter (0.1 L), equal to 100 milliliters. It is used in clinical laboratory medicine for reporting blood test results (blood glucose, haemoglobin, cholesterol in mg/dL or g/dL), in European nutrition labeling, and in Scandinavian cooking recipes. Despite its limited everyday use as a liquid measure, the deciliter is one of the most medically significant volume units — nearly every blood test result references it.
Blood glucose is reported in mg/dL. A small yoghurt pot or juice glass holds roughly 1–2 dL.
About Cubic foot (ft³)
A cubic foot (ft³) is the volume of a cube with 1-foot sides, equal to approximately 28.317 liters or 7.48 US gallons. It is used in the United States for natural gas billing, refrigerator capacity, aquarium size, concrete orders, and shipping container dimensions. Refrigerators are rated in cubic feet of storage, natural gas consumption is billed in cubic feet, and HVAC airflow is measured in cubic feet per minute (CFM).
A full-size refrigerator is typically 18–28 ft³. Natural gas is billed in CCF (hundreds of cubic feet) in the US.
Deciliter – Frequently Asked Questions
What is a deciliter used for in medicine?
Deciliters are the standard reference volume for blood test results. Blood glucose is reported in mg/dL, haemoglobin in g/dL, and cholesterol in mg/dL. Normal fasting blood glucose is 70–99 mg/dL.
How many milliliters are in a deciliter?
One deciliter (dL) equals 100 milliliters (mL). Since 1 dL = 0.1 L and 1 mL = 0.001 L, there are exactly 100 mL per dL.
Is the deciliter used in cooking?
Yes, in Scandinavia (Sweden, Norway, Denmark) recipes commonly list liquid ingredients in deciliters. 1 dL is roughly 6–7 tablespoons or just under half a US cup.
What is a normal blood glucose reading in mg/dL?
A normal fasting blood glucose is 70–99 mg/dL. Pre-diabetes is 100–125 mg/dL. Diabetes is diagnosed at ≥126 mg/dL on two separate tests. Post-meal levels should be below 140 mg/dL in non-diabetics.
How does a deciliter compare to a cup?
One deciliter (100 mL) is roughly 0.42 US cups. Conversely, one US cup is about 2.4 dL. For Scandinavian recipes, 1 dL ≈ just under half a cup.
Cubic foot – Frequently Asked Questions
How many liters are in a cubic foot?
One cubic foot equals approximately 28.317 liters. Since 1 foot = 30.48 cm, 1 ft³ = 30.48³ cm³ = 28,316.8 cm³ = 28.317 liters.
Why is natural gas measured in cubic feet in the US?
The US gas industry adopted cubic feet before metrication became widespread. Natural gas is billed in CCF (hundred cubic feet) or therms (≈ 100 ft³ by energy content). Metric countries use cubic meters.
What does cubic feet mean for refrigerators?
Refrigerator capacity is rated in cubic feet of internal storage. A compact dorm fridge is 1–4 ft³; a standard family fridge is 18–22 ft³; a large French door model can exceed 28 ft³.
What is CFM (cubic feet per minute)?
CFM measures volumetric airflow rate. HVAC systems, range hoods, and fans are rated in CFM. A typical home range hood requires 100–600 CFM; a whole-home HVAC system might move 2,000 CFM.
How many US gallons are in a cubic foot?
One cubic foot equals approximately 7.48 US liquid gallons. This is commonly used in plumbing, aquarium sizing, and pool volume calculations.