British Thermal Units (IT) to Kilograms of TNT

BTU/hour expresses cooling or heating power, not energy alone. A 12,000 BTU(IT)/h rating corresponds to approximately 3,517 W of thermal power. Watts can describe thermal power as well as electrical input; the two quantities must not be confused. An air conditioner's electrical input depends on its efficiency and operating conditions, rather than being the same as its cooling capacity.

A rough rule of thumb is 20 BTU per square foot of living space in a temperate climate. A 300 sq ft bedroom needs about 6,000 BTU/h; a 1,500 sq ft open-plan living area needs roughly 30,000 BTU/h. Actual requirements vary with insulation, ceiling height, climate zone, and window area. Poorly insulated older homes may need 30–40 BTU per square foot.

BTU is a unit of energy (heat); BTU/h is a unit of power (rate of heat flow). When an air conditioner is labelled "12,000 BTU," the industry shorthand actually means 12,000 BTU per hour. Technically one BTU equals about 1,055 joules of energy, while 1 BTU/h equals about 0.293 watts. The distinction matters for energy calculations but is routinely blurred in product marketing.

Natural gas energy quantities may be billed in millions of BTU (MMBtu) or therms. A therm nominally represents 100,000 BTU, but the legal U.S. and EC therm variants have their own fixed joule definitions. This converter keeps those therm variants separate; neither should be assumed to equal exactly 100,000 BTU(IT). Always check the unit convention used on the bill.

The UK metricated energy units in the 1970s–1990s, switching gas billing from therms (100,000 BTU) to kilowatt-hours and scientific work to joules. The "British" in BTU reflects 19th-century British steam engineering origins, not current usage. Today the BTU is almost exclusively an American unit, used for HVAC, gas pricing, and appliance ratings across the US.

One kilogram of TNT releases 4.184 MJ — enough to shatter windows within several meters and cause serious injury at close range. In open air, 1 kg of TNT produces a blast overpressure lethal to humans within about 2–3 meters. The effect depends heavily on confinement: the same charge inside a vehicle or building is far more destructive than in open ground.

One kilogram of TNT (4.184 MJ) is roughly the kinetic energy of a 1,500 kg car traveling at 75 km/h, or the energy stored in about 120 mL (half a cup) of petrol. It is also the chemical energy in roughly one large meal (1,000 kcal). The difference is that TNT releases its energy in microseconds rather than hours.

Mining engineers express blast charge sizes in kg of TNT equivalent to standardize across different commercial explosives. A typical quarry blast hole uses 5–50 kg of ANFO (ammonium nitrate/fuel oil), equivalent to roughly 4–37 kg TNT. Building demolition charges range from 10 to several hundred kg TNT equivalent, carefully placed at structural weak points.

A standard 155 mm artillery shell contains about 7–11 kg of TNT equivalent. A 500 lb (Mk 82) air-dropped bomb holds roughly 87 kg of TNT equivalent. An RPG-7 warhead is about 1–2 kg TNT equivalent. Anti-tank mines range from 5–10 kg TNT equivalent. These figures represent explosive fill, not total weapon weight.

A standard stick of commercial dynamite (about 200 g, 20 cm long) has a TNT equivalence of roughly 0.25–0.30 kg, since dynamite is about 1.25–1.5× as powerful as TNT by weight. Eight sticks of dynamite are roughly equivalent to one kilogram of TNT. Modern mining rarely uses traditional dynamite, preferring cheaper ANFO or emulsion explosives.